Oil Water Separators | Vertical Gravity Separators | Australia Wide

Next Day Dispatch on
Oil Water Separators

For Quotes And Orders

02 9524 6654

[email protected]

Oil Water Separator - VGS Free Standing Model

Our oil water separator is Australian manufactured and supplied in Australia. It comes with servicing options. The free standing edition has the following applications:

  • Panel Beaters
  • Car Detailers
  • Mechanical Workshops
  • Service Stations/Fuel Depots Loading Bays
  • Auto Dismantlers
  • Equipment Hire Companies Radiator Repairs
  • Commercial Car Washes
  • Engine Reconditioners

What makes our stand apart:

  • continuously meets the performance standards is able to handle high concentrations of oil
  • effectively removes the suspended solids
  • reduces vapour content to acceptable levels
  • requires less floor space
  • Oil Water Separator - VGS Free Standing Model
  • Oil Water Separator - VGS Free Standing Model
  • Oil Water Separator - VGS Free Standing Model
  • Oil Water Separator - VGS Free Standing Model

Flow rates from 1000L/hr to 1500L/hr

The VGS is a flooded system in which the inlet and outlet columns form a U-tube configuration such that the oil is trapped on one side of the main body, while the cleaned water flows out of the other side.

The main body contains a continuous truncated conical spiral pack (SPAK) which is made of olephilic material. Oily water is delivered into the bottom of the main body where it flows upwards through the centre of the SPAK assembly.

At the top of the main body, free oil and low density suspended solids are held, which eventually flow out for collection and suitable disposal.

The partially cleaned water is directed to the outside parameter of the conical SPAK and follows a tortuous pattern while cascading down and around the SPAK.

Here the lower density fluid (oil) is drawn up the incline of the olephilic surface of the SPAK and back into the low pressure centre of the VGS, where it co mingles with the incoming fluid and is redirected to the top of the main body.

A continuous convection is created within the SPAK by the density and pressure variation down the fluid column and the upward flow of the cleaned water will enter the output leg of the separator and will travel up and out of the system, whilst the heavy solids will drop to the base of the vessel.

The VGS (Vertical Gravity Separator) has been developed to effectively remove free oil, grease and suspended solids from wastewater plus greatly reduce the frequency and difficulty of maintenance compared to conventional plate separators.